01
What the BYD Battery-Box is
BYD's Battery-Box Premium is a stack of battery modules on a base, with a control unit on top. There are two ranges. HVS uses 2.56 kWh modules and comes in 5.1 to 12.8 kWh. HVM uses 2.76 kWh modules and runs from 8.3 to 22.1 kWh. Up to three towers can run in parallel, so a big home or a small business can go well past that.
It's lithium iron phosphate, rated IP55 for indoor or outdoor floor mounting, and it doesn't have an inverter of its own. That's the point of it: you pick the hybrid inverter, and the BYD battery plugs into it.
02
BYD with a Fronius GEN24 Plus
Most of the BYD batteries we fit go in with a Fronius GEN24 Plus. The single-phase Primo GEN24 Plus takes BYD HVS 5.1 or 7.7, or HVM 11.0 to 19.3. The three-phase Symo takes the larger sizes. The inverter decides the backup: PV Point for one emergency circuit, or Full Backup for the whole house with the Fronius switching gear.
BYD also works with GoodWe, Sungrow and SMA hybrids, around 20 brands in all, so it can suit an existing hybrid inverter that was installed battery-ready.
03
Where we put it, and why
BYD rates the Battery-Box from −10 to 50°C, and output drops near the top of that range. A west-facing wall or a tin shed in a Townsville summer gets close, so we site it in shade with airflow, the same way we'd treat any battery. The warranty also asks for it to go in within a month of purchase and never sit unused for six months, which we handle on the install side.
04
BYD battery installation Townsville — what we handle
Our team designs the system, installs the battery and inverter, lodges the Ergon Energy paperwork and applies the federal battery rebate to your quote. Every BYD battery installation Townsville customers book with us is commissioned and tested under a simulated blackout before handover. Get a free quote and we'll size the BYD to your evening usage.
Part of our Solar Battery Storage →